DALY SMART BMS

更新时间:2020-05-15 19:15:12点击:50812 service support

1. Item Description:

Smart BMS support 3S-32S, 30A-500A. Communication options with UART(Bluetooth, GPS), RS485,CAN. Can be OEM RS232 and heating batteries function.


2.The manual for Upper computer.

2.1 Load address for upper computer
#http://www.dalyelec.cn/daly/PCdalyBMS.zip

#https://drive.google.com/file/d/18DyyjW5PY17ruhJGza3VVmKhWbEa4jd2/view?usp=sharing

2.2Upper computer support below 3 kinds of communication.

2.21 USB to UART serial port

AdvantageCheaper

Disadvantagetransmit speed is slow

2.22 USB to 485

Advantageprice is in medium

Disadvantagetransmit speed is medium

2.23 USB to CAN

Advantagetransmit speed is fast

Disadvantageprice is highest

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

2.3  Double click upper computer’s software, and double click “PCMaster.exw”to start.

2.4 Select”comm set”pls pay attention that different USB port with different serial port.

2.41 Upper computer can auto-Identify UART serial port is"COM7" ,select Baud rate“9600” ,and then click“Open serial port”


2.42 Upper computer can auto-identify 485 serial port is"COM4" ,select baud rate“9600” ,then click“Open serial port”

2.43 CAN connecting should be clicked“》” ,set“CAN device”、“CAN channel”、“Baud rate”, and then click”Open CAN”

2.5 The showing are the same of these kinds of communication, the data and result also are the same

Come into data monitor, let’s make a example for 24S

2.51 Data monitor

2.52 Parameters setset the parameters in blank place,after you set succeeded,the data will be green color. Pls read the parameters and screenshot to save before setting so that you can reset if you made mistakes. )After you set succeeded, Level 1 means warning, Level 2 means protection.(But Soc, temperature difference and voltage difference won't be protected when they are in Level 2.

2.53 Reading dataPls reference below screenshot

2.54 Engineering modelFactory set it, clients no need to operate)

2.55 History warningIt can be saved the fault records of batteries, when the power off,the data will be cleared)

2.56 BMS updateFactory will provide the OEM installing software to clients for update according to different requires from different clients. If is not OEM communication protocol, pls ignore it.)

The introduction of Daly Smart BMS operation for upper computer is that all.







Recommended Reading